Customer Support
+86 - (0)21 - 6511 0461
Manufacturers count on Marathon for strong, durable, and efficient motors. It starts with extensive product lines – our industrial motors alone come in over a thousand configurations, and have output ranges from 0.18 kW to 8,000 kW, with a variety of enclosures and accessories like blowers, brakes, and encoders.
Aerospace, Agriculture, Automotive, Biomedical, Chemical, Construction, Energy, Food and Beverage, Forestry, HVAC, Lighting (high intensity), Manufacturing, Marine, Material Handling, Medical Equipment, Metal Processing, Mining, Oil and Gas, Pharmaceutical, Plastics, Pool and Spa, Power Generation, Pulp and Paper, Recreation, Refrigeration, Steel, Textiles, Transportation, Vehicular, Water Distribution and Treatment.
Machinery, Conveyers, Packaging Equipment, Escalators, Cranes and Hoists, Refineries, Pumps, Cutters, Fans, Blowers, Compressors, Beverage and Food Dispensers, Mining Sites, Foundries, Chemical Ports, Packaging Equipment.
We are dedicated to developing and manufacturing high power motors with the mounting dimension (H) of 800mm, 900mm, 1000mm and the highest power of 8000KW.
- AC Single phase capacitor run
- Permanent magnet
- High standstill torque while power off
- Long term stall operation
- Different operation voltage
- Different capacitor for different voltage
- Rated torque from 240g.cm to 1200g.cm
- Low temperature rise within 40K
- No magnetic cogging
- Low rotor inertia and good acceleration characteristics
- Less electromagnetic interference
- Low inductance
- Mechanical commutation with graphite or metal brush
- High efficiency up to 90%
- Linear voltage/speed | torque/speed | torque/current curve
- Small torque fluctuation due to multi segment
- Long service life
- Highly efficient
- Linear motor characteristics, excellent control properties
- Ironless winding with three phases in the stator
- Lowest electrical time constant and low inductance
- No detent
- Robust design
- Good heat dissipation, high overload capacity
- Rotating Neodymium permanent magnet with 1/2/4 pole pairs
- Spur gear with powder metallurgical techniques
- Or spur gears with case-hardened grinding techniques
- Fixed shaft with turning gears internally
- Or shaft with interference fit fixed gears internally
- High torque up to 30N.m with low noise lower than 65dB
- Module based flat design
- Optimized for positioning control system
- Robust structure with closed aluminum enclosure
- Reduction ratios of 5:1 to 512:1
- High torques up to 100 Nm
- High performance in a small space
- High reduction ratio in a small space
- Concentric gear input and output
- Standard service time 20,000 hours under rated conditions
- High precision with low backlash
- High overload capacity due helical gear design
- AC synchronous motor
- Spur gears with aluminum enclosure
- Max. output 10Nm
- Different positioning angle available
- Integrated absolute position sensors
- Positioning precision: better than ±1.0°
- Set value via analog signal with hysteresis integrated
- DC/EC motor
- Spur gears with aluminum enclosure
- Max. output 30Nm
- Different positioning angle available
- Integrated absolute position sensors
- Positioning precision better than ±1.0°
- Set value via analog signal or bus system (CANopen, RS-485)
- Hysteresis integrated for analog control
- EC motor
- High precise planetary gears
- Max. output 100Nm depends on size
- Suitable for continuous speed or precise positioning control
- Integrated absolute encoder
- Positioning precision better than ±0.3°
- Set value via analog signal or bus system (CANopen, RS-485)
- Hysteresis integrated for analog control
- Output shaft with lead/ball screw for linear positioning
- EC motor
- High precise planetary gears
- Max. output 100Nm depends on size
- Suitable for continuous speed or precise positioning control
- Integrated absolute encoder
- Set value via analog signal or bus system (CANopen, RS-485)
1W ... 8,000kW different motors
Based on her "know-how" knowledge and derived from German engineering technology, Enginesound delivers valueable services and innovative products to machinery manufacturing industry. We focus on motors, gears, sensors and positioning controllers.
Our aim is to bring our customers with the latest trends and techniques in automation to improve the productivity and quality. We try to persuade you not only with the quantity, but with the quality of the services and products we present.
沪ICP备 14034747